My problem with DIY is that I can’t make up my mind. Which means sometimes, just sometimes, I get a little carried away. I fear this repainted striped herringbone dresser for the kids room is that sort of a thing.
How to Paint Herringbone Stripes on an Old Dresser
The story of this potentially ill-fated dresser starts a couple of months ago when I was once again trying to shove the kids clothes into their previous dresser. Clearly we needed more space so who to turn to? Craig, natch. I landed on this bad boy.
I liked the clean lines. It was solid wood. High enough to act as a changing table, but not so high to be a safety hazard for our jump-happy 3-year-old. And simple enough to easily repaint. On my forays into Pinterest and other design sites, there were lots of color gradient dressers like this one, that I really liked. But my dresser only had four drawers and I was worried that the gradient thing might not come across with so few drawers. I was also worried that the gradient drawers would be too many stripes with the striped wall and the striped rug. Sooooo, I looked into a chevron-ish option. I love a chevron, but I feel like they’re a fad and I’ve overdone them already… But this dresser from A Little Glass Box had an interesting take on the chevron- a herringbone.
This is where my little DIY dresser got away from me. I couldn’t decide. So I incorporated both the gradient and the herringbone. Which was probably a mistake, but we’re going to live with it.
First I made a palette with the various paint swatches I had on hand to see which ones worked with the fabric in the kids’ room, the wall stripes, and the carpet. I narrowed my color options down to three that worked and decided to use some white as well to tie in the bed frames/ wall.
I wanted the top drawer to have the lightest color combination and then work my way down so the darker pairing was on the bottom drawer. Emphasis on wanted. More on this later.
Taping off the drawers was easier than it would have been for a chevron pattern, so that was a pleasant surprise. I started by marking the middle of each drawer. From this midline, I made my herringbone pattern at a right angle with each stripe the width of my painters tape.
Rather than have to cut each piece of tape, I painted each half of the drawer separately. Bare with me. For the top half of the drawer, I taped off diagonal stripes and taped off the midline. Then I painted. When dry, I removed the tape, and taped off the bottom half of each drawer face with the diagonal going in the opposite direction, and I painted these stripes to alternate with the top half of the drawer. Phew.
I repeated this step for each drawer but used my varying color pattern on each one. This is where I hit a little glitch. I had measured each drawer front to see whether they had a particular order in the dresser and each drawer was the same height. Which I took to mean each drawer was the same. Nope. My convoluted herringbone/ gradient pattern is now officially out of whack. I wanted the top drawer to be on the bottom, the aqua and green drawer to be next, the light blue and green to be third and the white and light blue to be on the top.
Here’s how it looks in the room. Sometimes I think it’s a somewhat cool. And most times I think it’s too much. The kids don’t care, though.
And next time I go to plan a painting project, I will remember this dresser and how I painted it with everything but the kitchen sink.
Update: See this dresser featured on Apartment Therapy!